Hemp Dryers / Hemp Conveyors

Hemp Conveyors

As with all equipment that touches cannabis, even shredders, hemp conveyors must be as gentle as practicality allows. A certain level of destruction is necessary for any competitive process, but reducing this effect whenever possible throughout a line will increase yields and efficiency.

Trough belt conveyors are generally best for un-shredded and wet hemp because they’re easy to clean and fibrous stalks can bind in augers and screw conveyors. And because hemp biomass agglomerates and does not roll easily, belt conveyors can be inclined up to 30°.

When conveying dry, shredded product up slopes, screw conveyors are best for short runs and chain disks are best for long runs. Although chain disks’ capacity for hemp maxes out around 150 lbs. of dried flower per minute, they can run over 2,000 feet and around 24 turns from a single drive. They can also accommodate as many inlets and outlets as needed.
Although the narrow augers used for milled grain are often thought of as an alternative, we only recommend them under special circumstances because of the inherent friction involved.

As with most applications, every hemp system is unique and will have its own needs. Cleated belt conveyors can be used for particularly steep inclines and pneumatics are a good solution for moving product post-dry, especially when air is already available in the system from clearing a mill. We offer numerous configurations and options to accommodate any layout and provide 24/7 service and support as we do with all our equipment.

Conveyors can be controlled manually with panels, but because feed rate is so important for consistent drying, it's best to use weighbelts to meter the hemp automatically.

Standard Belt Conveyor Inclusions

  • Support legs as required to reach maximum 30° incline
  • Mild, painted steel
  • 2HP motor
  • Inlet hopper to guide incoming hemp
  • Product guide on conveyor
  • Bar guide weir to maintain product depth

 

Standard Screw Conveyor Inclusions

  • U-trough bolt-on cover
  • Support legs required to support incline
  • 1HP inverter-duty motor with shaft-mounted reducer
  • UHMW Liner

Related Products

More Hemp Drying Equipment

Showing 1–4 of 12 results

Contact Us

Reach out for a quote, more information, or just to talk about your process. We love discussing new ideas and want to hear about your application.

Visit Us

13911 NW 3rd Ct.

Vancouver, WA 98685

Contact us

(503) 248-0711

frontdesk@abmequipment.com

Open Hours

M-F: 8am – 5pm