Screw Feeders
| Throughputs | 0.007–1,137 ft³/h |
| Perfect for | Powders, granules, chips, flakes & fibers, organics and inorganics, other virgin & recycled materials |
| Made In | USA |
Models
High Precision Feeders – 1.1 to 330 lbs./hr. (0.007–0.56ft³/hr, application-dependent)
Ideal for volumetric or gravimetric low feed rate applications. This unit features a quick and easy disassembly dual arm external hopper agitation system for maximizing material handling versatility and simplified maintenance. Disposable or recyclable EPDM feed hoppers are also available.
Specs
- Accuracy:
– Gravimetric: ±0.25–1%
– Volumetric: ±1.5–2.5%
- Materials
– Contact: 304 SS (screws), EDPM, PTFE (Rulon 641)
– Non-contact: 316 SS, EDPM, PTFE, PET-P - IP65 washdown
- Dust-proof, quick-release clamps on all product-contact parts
Options
- 3-A Sanitary or Standard Configurations
- Electrical: 240V, 1-phase, 4A /or/ 120v, 1-phase, 8A
- Hopper:
– Sizes: 0 (no hopper for continuous operation), 4, 12, or 36 L
– Cover: manual or auto - Screw Diameters: 0.27, 0.5, 0.75, 1.25”
Universal Feeders – 3.4 to 1,137 ft³/hr
Accommodating the widest range of sizes and configurations, the Universal model (Mechatron) can operate Typical applications are found in the plastics, chemical, food, detergent pharmaceutical, building materials, and cement industries. And with components easily-accessed from the non-process side, it significantly reduces time needed for maintenance and cleaning.
Specs
- Accuracy:
– Volumetric: ±2 – 5%
– Gravimetric: to spec.
Options
- Controls: Local or remote
- Materials:
– Toner-resistant or static dissipative coating
– 304/316 SS & HDPE contact surfaces
– Standard or 3-A Sanitary configuration - Hopper
– Rigid or flexible interiors (for flow assist)
– Sizes: 0 (no hopper for continuous operation), numerous sizes from 2.9–100ft³
– Open, manual, or auto-covers - Screws
– 304 or 316 SS
– Single or dual feed - Motor
– 460 VAC, 3 PH, 50 or 60Hz
– Gear ratios: 14:45, 18:40, 24:36, or 26:32
– Explosion proof or wash down
Whereas vibratory feeders are better for irregular product and those that would damage or be damaged by feed screws, screw feeders can handle certain products better, such as liquids and viscous or sticky slurries. If your product fits in neither or both categories, reach out and we’ll identify the best solution.
Bulk Feeders – 282 to 1,112 ft³/hr
The bulk feeder is ideal for lighter, more fluffy powdered products. Most popular for plastic film extrusion and compounding, it can directly fill large vessels or maintain load for smaller, downstream feeders. The system is designed to allow easy dismantling for cleaning and is available in steel for more abrasive applications.
Accuracy to spec.
Features:
- Internal Agitator (bottom-driven for balance)
- Double-wound helix feeder (maintains smooth feed at low speeds)
- Modular components (easily adaptable for different speeds and products)
- Tube-in-tube discharge minimizes wear
Options:
- Hoppers: 35, 53, 71, or 88ft³
- Screw Diameters; Feed Rates:
– 5.9”; 176–282ft³/hr
– 7.9”; 353–565ft³/hr
– 9.8”; 706–1,112ft³/hr
Whereas vibratory feeders are better for irregular product and those that would damage or be damaged by feed screws, screw feeders can handle certain products better, such as liquids and viscous or sticky slurries. If your product fits in neither or both categories, reach out and we’ll identify the best solution.
>40 Years’ Experience
From equipment sales to integration and service, ABM Equipment has scaled and optimized systems just like yours. Give us a call or fill out the form below to find out how we can scale your processes and reduce your operating costs.
Equipment | Design | Integration | Service
Related Equipment
Large Processor’s Mixer/Grinder
Capable of up to 146 lbs./min. with a 330 lb. hopper, the Large Processor's Mixer/Grinder efficiently homogenizes meat and plant products by using thin paddles in the angles ribbons would normally take. As a hybrid between ribbon and paddle mixers,...
Processor’s Mixer/Grinder
Capable of up to 120 lbs./min. with a 300 lb. hopper, the Processor's Mixer/Grinder employs thin paddles in the angle of ribbons. As a hybrid between ribbon and paddle mixers, they strike a balance between high homogeny and throughput while...
Ribbon Mixer/Grinder
Standard Features Grind Motor: 7.5 HP (Mix Motor: 1.5 HP) Variable Speed Mix and Grind Programmable Automatic Forward / Reverse Mixing Cycle Open grid lid allows seasoning to be added during operation No tool lock ring necessary Conical Hopper With...
Tabletop Mixer/Grinder
Standard Features Figure 8 mixing paddles All stainless steel frame, tub and lidSafety interlocked tub and lid Sits on counter or cart for most ergonomic working conditions Removable tub 32/42 head for easy cleaning Counter balanced lid. Safety...
Cereal Grain Mill
Operating Principle A consistent flow of product enters the inlet (as seen in the diagram at A) located at the top of the Cereal Grain Mill, and travels through the center of the stationary disc (B) into the milling chamber (C). The rotating disc...
Bud Sorters
Sizes Small Bud Sorter 30” diameter 2-Deck High Efficiency BudsorterTop Lid, 304 Stainless Steel with 150mm inlet, 150 mm inspection port with push-oncover.One (1) top Perf Plate (10 mesh)Top Sieve Deck assembly 30”, 150mm deep sieve deck with...