This Acrison gravimetric screw feeder comes from an agglomeration drying line and is optimal for feeding powders in to a mix with a final throughput of 2000 lbs./hr.

Most is used, some is new (modified for specific uses which dissolved before delivery). All used equipment was working when inventoried and can be tested again if practical.

This Acrison gravimetric screw feeder comes from an agglomeration drying line and is optimal for feeding powders in to a mix with a final throughput of 2000 lbs./hr.

3 used Wolftec powered roller conveyors are for sale after 3 years in a box handling application. The owners sold them because we integrated a new system and these segments are no longer needed. In great working condition. Accepting offers.

These (3) GEA Scan-Vibro conveyors come from a dairy plant and have RA-32 internal finish (EHEDG and 3A Hygienic), CIP nozzle mounts, are bi-direction compatible, are designed for continuous operation. They are available individually or together.

450 cubic foot 304 stainless grist case with 2B outer finish and sanitary interior finish. 10 gauge cone bottom, 26″ x 26″ bolted access cover, with 4 heavy duty lifting eyes. Carries up to 3,172 Gal of liquid and 11,436 lbs. of dry bulk solids.

This TDI Packsys x-ray machine was a temporary solution for a flavor manufacturer and was originally purchased for $165K. It is a relatively new machine (built in 2026) with ~1,100 hours of run-time and in excellent condition.

Used primarily for milling dairy proteins down to 100. mesh, this flexible system mills virtually anything down to 30 micron depending on application. The yield loss is minimal, increasing temperature from 10-20 degrees F, and its maximum throughput is 2000 lbs./hr. for difficult materials and 4000 lbs./hr. for easy ones.

This used Bepex/Schugi Flexomix (model 160, serial number N5-36/0) is a high-intensity, continuous mixer and wet agglomerator designed for homogeneous blending of powders with liquids.

This used Relco liquid skid is for sale including the balancing/metering tank and pv pump. It was used to liquify lecithin and water in a mix tank, metering it for for agglomeration with the metering pump.

This Kason fluid bed dryer comes from an agglomeration drying line and is optimal for any agglomerated powders such as dairy proteins, calcium carbonate, and charcoal. It was originally spec’d for whey protein (WPI) and had a maximum throughput of 2000 lbs./hr.

There are 3x 3000 Newton K-Tron load cells with 2 junction boxes and the corresponding cables. There is also a hopper extension and downspout adapter available for a K-Tron T20 feeder, which the load cells were paired with. The cost for the whole bundle is $1,000, or you can make an offer if you only want some elements. Everything was in working condition when the system was up-sized around 2015.

• Emergency Stop (E-stop) and Main power disconnect.
• NEMA 12 Free Standing Motor Control Enclosure.
• 480V/3 Phase/60 Hz.
• Includes burner PID controls.
• Flame safeguard controls.
• Digital Temperature read-outs for the inlet and outlet air streams.
• Motor Starters for:
o Qty 2 – 5 HP w/ VFDs
o Qty 2 – 15 HP
o Qty 3 – 3 HP w/VFDs
o Qty 1 – 0.5 HP w/ VFD
o Qty 2 – 2 HP
o Qty 2– 7.5 HP motors
• Includes 120VAC and 24VDC power supplies and power distribution.

Very lightly used OvenPak 435 burner from the hemp industry.

Very lightly used OvenPak 435 burner from the hemp industry.
5000 lb x 1 lb floor scales with indicators.
Multiple conditions available;
$800 - $1750.
5000 lb x 0.5 lb floor scales with indicators.
Multiple conditions available; $600-$1,250
Multiple used, $150 - $600
Like-new, $1,800.
Ceramic magnets, used, $200
Ceramic magnes, Used, $150
6-cylinder flatbed with 532,232 miles used as a scales service vehicle. Good condition, regular maintenance kept, RWD manual transmission.
Equipment #: 30510
Used, make offer
Replacement shaker screen, checker 5# style.
Lighly used, $250
Reject system for liquids, jellies, jams, beverages, slurries, etc.
2 Demos & 1 New: $250 - $300
Non-contact interlock switches with large sensing range and tolerance for misalignment, including cables. Model number 440N-Z21S16B.
Multiple new & used: $60-$80