Used Screw Feeder

$25K

Gearbox, other parts, and setup help included

This Acrison gravimetric screw feeder comes from an agglomeration drying line (primarily for diary proteins and calcium carbonate) and is optimal for feeding any powder in to a mix with a final throughput of ~2000 lbs./hr.

Acrison Model 402X-170-2 Weigh Feeder Specs.

• Gravimetric or volumetric
• 10" conical valve
• 304 Stainless steel contact surfaces with continuous welds ground smooth
• Contact surfaces are modified 2B Mill Finish
• Solid flight type metering auger, size ‘K’ 316 stainless steel
• Discharge cylinder is 18” long with  downspout flange
• 1 HP, washdown, inverter-duty drive motor (metering Auger)
• 1 HP, washdown, constant speed drive motor (agitator Auger)
• Hopper is 10cuft capacity
• Hinged and quick-clamp hopper access door 10’ x 16”
• Hopper cover, quick clamped and gasketed with a circular inlet and vent as required
• 2 Teflon hopper cover inlet and vent sleeves for required diameter, 6” long
• White Buna-N gasketing
• White Enamel (Non Toxic) Paint

Acrison Refill Hopper Specs.

• 10 cuft capacity
• Contact Surfaces are 304 stainless steel with 2B mill finish
• Hinged and quick-clamp hopper access door 10’ x 16”
• Quick Clamp hopper cover
• Hopper High and Lo level Probes
• Hopper Mounting lugs
• Outlet Flange
• Outlet slide gate valve
• Controls & Instrumentation

Model SBC 2000 DSP Weigh feeder controller

• SBC-2000 DSP to be common mounted with Motor CTRLS
• SBC-2000 DSP Controller
• Set of 2 power supplies, Filter and CB
• Power supply, 24VDC, DIN rail mounted
• Relay Rack, 4 places
• SSR, AC output 12-140 VAC, 3A
• Analog input and output modules

AC Variable Frequency Motor Controller

• AB PowerFlex 40, 1HP 115/1/50-60
• Contractor, Suppressor Assy and Fusing
• Motor Starter

Common Enclosure for Controls

• Hoffman Wall mount Nema 12 Enclosure
• Disconnect Assy, thru-the-door